Camogli Python Watch Strap
Python scales sit in bands across the strap, small and tight at the sides and wider through the middle where the belly runs. The run of the skin falls differently on every band, so no two come out alike.
Behind the python is cowhide, which is what gives the strap its strength. The stitching is done by hand. The buckle is stainless steel, in black or silver.
3.3 mm thick, cut at 125 mm and 75 mm, for 44 mm and 49 mm Apple Watch cases. Blue, dark grey and white grey.
Every skin is chosen individually, so no two pieces carry the same pattern.
- Material: Genuine python skin with cowhide leather backing
- Skin: Vietnamese python, natural scale pattern
- Design: Hand-sewn with contrast stitching and two keeper loops
- Closure: Stainless steel pin buckle
- Hardware: Buckle in black or silver
- Dimensions: 3.3 mm thick, 125 mm plus 75 mm long
- Compatibility: Apple Watch, with lug connectors
- Colours: Blue, Dark Grey, White/Grey
- Sizes: 49 mm
Python scales overlap in one direction, like roof tiles, and that direction decides how the piece is cleaned. Always wipe from the head end towards the tail, along the way the scales lie. Wiping against them lifts the edges and they do not settle back.
A soft dry cloth is enough. Keep the piece out of direct sun, which fades the markings, and away from damp, which is what makes scales curl.
Condition it lightly and rarely with a product made for snake skin. Too much softens the scale edges and they begin to catch.
Store it flat or lightly stuffed, in its dust bag. A lifted scale can often be laid back down by a specialist, so bring it in rather than gluing it.
We ship worldwide. If a piece is faulty on our side we replace it or refund you. The choice is yours.
